Fast Ethernet vs Gigabit PoE switch: which one for CCTV?
Fast Ethernet ports run at 100 Mbps. Gigabit ports run at 1000 Mbps. For most CCTV jobs Fast Ethernet is enough and saves money. Gigabit is for heavier traffic.
When Fast Ethernet is enough
A normal 2MP–5MP CCTV camera sends a video stream that needs only a few Mbps, far below the 100 Mbps of a Fast Ethernet port. So for regular home, shop, office and factory CCTV, Fast Ethernet works well.
NEXELTRON Fast Ethernet models: 4FE, 8FE, 16FE + SFP and 24FE + 2 SFP. The 8, 16 and 24 port FE models have Gigabit uplinks, so all camera traffic reaches the NVR at full speed.
When to choose Gigabit
Side by side
| Fast Ethernet | Gigabit | |
|---|---|---|
| Speed per port | 100 Mbps | 1000 Mbps |
| Best for | Normal 2MP–5MP CCTV | 4K cameras, Wi-Fi, office use |
| Price | Lower | Higher |
| PoE Watchdog, 250 m Extend | Yes | Yes |
Frequently asked questions
Is Fast Ethernet enough for CCTV?
Yes, for normal 2MP–5MP cameras. Each camera uses only a few Mbps, well below the 100 Mbps of a Fast Ethernet port.
CCTV ke liye Fast Ethernet chalega ya Gigabit lena padega?
Normal 2MP–5MP camera ke liye Fast Ethernet kaafi hai aur sasta bhi. 4K camera, Wi-Fi ya office ka network bhi isi switch par chalana ho to Gigabit lein.
Do Fast Ethernet NEXELTRON switches have Gigabit uplink?
Yes. The 8, 16 and 24 port Fast Ethernet models have Gigabit uplink ports. The 4FE model has Fast Ethernet uplinks.